How to Make Decorative Stone - Marble More Durable

Ensuring the durability of decorative stones like marble involves multiple steps, from pre-factory processing to transportation, post-arrival inspection, and post-installation care.

Pre-factory Processing of Marble

1. Post-Cutting Treatment: Immediately wipe off residual water stains after cutting and air dry to prevent rust spots, efflorescence, and other issues.

Considerations During Stone Transportation

1. Handling Preparation: Prepare according to the stone's quality, specifications, and transportation method.

2. Packing Protection: Use wooden frames, wire boards, or cartons for packaging.

3. Clean Transportation Tools: Ensure the vehicle or ship cabin is clean to prevent stone contamination.

4. Long-Distance Transportation Protection: Cover with tarpaulins to protect from wind, sun, and rain.

5. Proper Loading: Load reasonably without overloading and ensure stones are securely placed.

Inspection After Marble Arrival

1. Size and Damage Inspection: Check the size specifications and damage of the marble.

2. Back Adhesive Alkali Resistance Test: Test the alkali resistance of the back adhesive and apply alkali-resistant back adhesive if necessary.

3. Other Five Sides Protection Performance Test: Test the protection performance of the other five sides to ensure no color change, deepening, or water stains.

Six Sides Protection Workmanship of Marble

1. Principle: Ensure the six sides of the stone are dry and clean.

2. Bottom Surface Treatment: After removing the mesh cloth, apply alkali-resistant agent and sprinkle coarse sand to enhance adhesion to the cement layer.

3. Treatment of Other Five Sides: Evenly apply organic silicon penetration protective agent and wipe off excess to avoid surface mottling.

Moisture Control in Stone Laying

1. Cement Mortar Ratio: Strictly follow the standard ratio and control the moisture level.

2. Bottom Layer Mortar Moisture: Follow the principle of hand-clumping and blooming on the ground.

Post-Laying Care of Stones

1. Curing Period: At around 20 degrees Celsius, it should not be walked on for at least 7 days, and grinding and crystallization care should be done after 28 days when the stone is completely solid.

Conclusion

By following these steps, the durability of decorative stones like marble can be ensured. Attention to each step, from pre-factory treatment, transportation protection, post-arrival inspection, precise control during laying, and professional post-installation care, is crucial.