The accuracy, cutting speed and smoothness of the stone cutting machine all determine the quality of the product. Daily maintenance of the machine can not only increase the life of the machine can also improve the quality of the product, to bring considerable economic benefits to the enterprise.

Machine maintenance can be divided into

Daily stone cutting machine maintenance and maintenance:

1. clean the entire machine and sink deposits every day.

2. pay attention to observe the machine horizontal and vertical guides and rack teeth surface whether there is lubricant, to ensure that always maintain good lubrication.

Weekly Stone Cutting Machine Maintenance and Care:

1. Weekly comprehensive cleaning of the machine table, cleaning of the transmission rack and pinion, oil injection and oil change in strict accordance with the lubrication requirements.

2. check whether the horizontal and vertical guide rail slider is working properly, if there is any abnormality need to be replaced in time.

3. test the sensitivity of the travel switch limit switch, etc., if abnormal timely replacement.

Monthly stone cutting machine maintenance and maintenance:

1. check the cutting saw blade: according to the degree of wear to determine whether to replace the new saw blade.

2. check all joints, pipe bands are not broken

3. check whether all the fastening parts are loose, if so, reinforce them in time.

4. check the electrical components in the electric control box, whether the wiring screws are loose and whether the control action of the electrical components is sensitive.

5. check whether the clearance between the movement rails is within the permitted range. 6. check all buttons and selector switches.

6. Check the validity of all buttons and selector switches.